Hi Richard, Corrected step_threshold to 0 and observed that slave's servo state going to locked state.
But the offset is continuously increasing.. ptp4l[12074.007]: master offset -31076 s2 freq -1 path delay 4145 ptp4l[12075.008]: master offset -46783 s2 freq -1 path delay 4997 ptp4l[12076.008]: master offset -60785 s2 freq -1 path delay 4145 ptp4l[12077.008]: master offset -76475 s2 freq -1 path delay 4977 ptp4l[12078.008]: master offset -92161 s2 freq -1 path delay 5809 ptp4l[12079.008]: master offset -107002 s2 freq -1 path delay 5809 ptp4l[12080.008]: master offset -121631 s2 freq -1 path delay 5596 ptp4l[12081.012]: master offset -136760 s2 freq -1 path delay 5809 ptp4l[12082.008]: master offset -151538 s2 freq -1 path delay 5809 ptp4l[12083.008]: master offset -166173 s2 freq -1 path delay 5596 ptp4l[12084.009]: master offset -181008 s2 freq -1 path delay 5596 ptp4l[12085.008]: master offset -194884 s2 freq -1 path delay 4624 ptp4l[12086.008]: master offset -208806 s2 freq -1 path delay 3698 ptp4l[12087.008]: master offset -223651 s2 freq -1 path delay 3698 ptp4l[12088.008]: master offset -238042 s2 freq -1 path delay 3241 ptp4l[12089.008]: master offset -252481 s2 freq -1 path delay 2838 ptp4l[12090.009]: master offset -267209 s2 freq -1 path delay 2722 ptp4l[12091.008]: master offset -282064 s2 freq -1 path delay 2722 ptp4l[12092.009]: master offset -296912 s2 freq -1 path delay 2722 ptp4l[12093.009]: master offset -310850 s2 freq -1 path delay 1819 ptp4l[12094.009]: master offset -327346 s2 freq -1 path delay 3463 ptp4l[12095.009]: master offset -342191 s2 freq -1 path delay 3463 ptp4l[12096.009]: master offset -356094 s2 freq -1 path delay 2521 ptp4l[12097.009]: master offset -372022 s2 freq -1 path delay 3604 ptp4l[12098.009]: master offset -386867 s2 freq -1 path delay 3604 ptp4l[12099.009]: master offset -401705 s2 freq -1 path delay 3604 ptp4l[12100.009]: master offset -416547 s2 freq -1 path delay 3604 Can you please help me in knowing what might be the reason for this? -Aditya On Tue, Jan 17, 2023 at 3:05 PM Richard Cochran <richardcoch...@gmail.com> wrote: > On Fri, Jan 13, 2023 at 12:32:21PM +0530, Aditya Venu via Linuxptp-users > wrote: > > > d) I'm using default config files for both master and slave(attaching > them > > for reference) > > You are NOT using the default configuration. > You changed step_threshold from the default of zero. > This is the reason for the oscillation between S0 and S1. > > Thanks, > Richard > -- Disclaimer:- This footer text is to convey that this email is sent by one of the users of IITH. So, do not mark it as SPAM.
_______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
