Hi Miroslav, *Below is the output for master*:
*sudo ./phc_ctl /dev/ptp2phc_ctl[14216.300]: capabilities: 999999999 maximum frequency adjustment (ppb) 0 programable alarms 0 external time stamp channels 0 programmable periodic signals doesn't have pulse per second support* *And this is for slave*: *sudo ./phc_ctl /dev/ptp0phc_ctl[14301.195]: capabilities: 999999999 maximum frequency adjustment (ppb) 0 programable alarms 2 external time stamp channels 2 programmable periodic signals has pulse per second support* On Tue, Jan 17, 2023 at 4:11 PM Miroslav Lichvar <mlich...@redhat.com> wrote: > On Tue, Jan 17, 2023 at 03:46:29PM +0530, Aditya Venu via Linuxptp-users > wrote: > > Corrected step_threshold to 0 and observed that slave's servo state going > > to locked state. > > > > But the offset is continuously increasing.. > > It might be a driver issue. What does phc_ctl /dev/ptp0 (or the > corresponding device) print? > > -- > Miroslav Lichvar > > -- Disclaimer:- This footer text is to convey that this email is sent by one of the users of IITH. So, do not mark it as SPAM.
_______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
