Hi Miroslav, Any suggestions to the above issue please?! On Tue, Jan 17, 2023 at 4:21 PM Aditya Venu <aditya.v...@5g.iith.ac.in> wrote:
> Hi Miroslav, > > *Below is the output for master*: > > > > > > > > > *sudo ./phc_ctl /dev/ptp2phc_ctl[14216.300]: capabilities: 999999999 > maximum frequency adjustment (ppb) 0 programable alarms 0 external time > stamp channels 0 programmable periodic signals doesn't have pulse per > second support* > > *And this is for slave*: > > > > > > > > > *sudo ./phc_ctl /dev/ptp0phc_ctl[14301.195]: capabilities: 999999999 > maximum frequency adjustment (ppb) 0 programable alarms 2 external time > stamp channels 2 programmable periodic signals has pulse per second > support* > > On Tue, Jan 17, 2023 at 4:11 PM Miroslav Lichvar <mlich...@redhat.com> > wrote: > >> On Tue, Jan 17, 2023 at 03:46:29PM +0530, Aditya Venu via Linuxptp-users >> wrote: >> > Corrected step_threshold to 0 and observed that slave's servo state >> going >> > to locked state. >> > >> > But the offset is continuously increasing.. >> >> It might be a driver issue. What does phc_ctl /dev/ptp0 (or the >> corresponding device) print? >> >> -- >> Miroslav Lichvar >> >> -- Disclaimer:- This footer text is to convey that this email is sent by one of the users of IITH. So, do not mark it as SPAM.
_______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
