On Thu, Oct 13, 2011 at 16:03, Tim Nelson <tnel...@rockbochs.com> wrote: > I would expect it to work this way also. However, I've removed the OPT > interfaces corresponding to the OpenVPN servers. Next, I've added one rule to > 'Allow all traffic, any protocol, any source, any destination, etc' the > OpenVPN tab in the firewall rules page. This should allow all traffic from > all clients. However, even after saving, then clearing the state table, I'm > not able to pass traffic over any of the OpenVPN links. > > I should mention, this system was upgraded from 1.2.1 to 2.0-RELEASE. Also, I > did *not* uninstall any packages prior to the upgrade (read the upgrade notes > afterwards... :/ ). Does this have any relevance? Should I reinstall this > system from scratch, then recreate each VPN server/interface? Maybe just > delete all the VPN servers, and start fresh?
which direction are you trying the connectivity? the rules on the openvpn tab are for connections coming from the remote system to the pfSense box. If you want to connect out from local boxes to the remote system over the vpn then you need appropriate rules on the relavent interface (such as lan) to allow the traffic. -- Regards, The Honeymonster aka Daniel Llewellyn _______________________________________________ List mailing list List@lists.pfsense.org http://lists.pfsense.org/mailman/listinfo/list
