----- Original Message -----
> On Thu, Oct 13, 2011 at 16:03, Tim Nelson <[email protected]>
> wrote:
> > I would expect it to work this way also. However, I've removed the
> > OPT interfaces corresponding to the OpenVPN servers. Next, I've
> > added one rule to 'Allow all traffic, any protocol, any source, any
> > destination, etc' the OpenVPN tab in the firewall rules page. This
> > should allow all traffic from all clients. However, even after
> > saving, then clearing the state table, I'm not able to pass traffic
> > over any of the OpenVPN links.
> >
> > I should mention, this system was upgraded from 1.2.1 to
> > 2.0-RELEASE. Also, I did *not* uninstall any packages prior to the
> > upgrade (read the upgrade notes afterwards... :/ ). Does this have
> > any relevance? Should I reinstall this system from scratch, then
> > recreate each VPN server/interface? Maybe just delete all the VPN
> > servers, and start fresh?
> 
> which direction are you trying the connectivity?
> 
> the rules on the openvpn tab are for connections coming from the
> remote system to the pfSense box. If you want to connect out from
> local boxes to the remote system over the vpn then you need
> appropriate rules on the relavent interface (such as lan) to allow the
> traffic.
> 

I'm attempting to connect from a client to a device on the LAN which means the 
traffic should be hitting the filter rule on the OpenVPN tab, which allows all 
traffic.

--Tim
_______________________________________________
List mailing list
[email protected]
http://lists.pfsense.org/mailman/listinfo/list

Reply via email to