Hi, We are running pfsense 2.0 on our site and we are trying to establish an ipsec to a partner with cisco ios. The problem is that the cisco side have some requirements: - All traffic from our side has to come from an public ip.
Meaning we have some servers on our local subnet that needs to send traffic over the ipsec but the traffic has to come from an public ip instead of the local lan ip of the server. Is that possible with pfsense 2.0? I have done some tests with manual outbound nat rules with the following mapping: Interface: WAN Source: Lan subnet Source port: * Destination: * Destination: 500 NAT Address: virtual ip (public) NAT Port: * Static port: YES But when I for example connect to rdp to a server over the ipsec, it's traffic from the lan subnet ip from our site that is logged, not the virtual public ip. I tried an outbound rule just from LAN to WAN and to use the virtual ip as nat address and that worked as expected. whatismyip.com showed the virtual ip instead of the real wan ip. So i'm just wondering if anyone here knows how to do this or if it even is possible at all? Thanks in advance
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
