Hi, can you sent us the requirements. Normely there is no problem building a IPSec connection between an IOS device an pfSense.
Kind Regards Am 19.10.2011 um 13:30 schrieb Ståle Johnsen <[email protected]>: > Hi, > > We are running pfsense 2.0 on our site and we are trying to establish an > ipsec to a partner with cisco ios. The problem is that the cisco side have > some requirements: > - All traffic from our side has to come from an public ip. > > Meaning we have some servers on our local subnet that needs to send traffic > over the ipsec but the traffic has to come from an public ip instead of the > local lan ip of the server. Is that possible with pfsense 2.0? I have done > some tests with manual outbound nat rules with the following mapping: > Interface: WAN Source: Lan subnet Source port: * Destination: * Destination: > 500 NAT Address: virtual ip (public) NAT Port: * Static port: YES > > But when I for example connect to rdp to a server over the ipsec, it's > traffic from the lan subnet ip from our site that is logged, not the virtual > public ip. I tried an outbound rule just from LAN to WAN and to use the > virtual ip as nat address and that worked as expected. whatismyip.com showed > the virtual ip instead of the real wan ip. > > So i'm just wondering if anyone here knows how to do this or if it even is > possible at all? > > Thanks in advance > _______________________________________________ > List mailing list > [email protected] > http://lists.pfsense.org/mailman/listinfo/list
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
