Hello pfSense Members, Again im mailing about this as the First reply did not work. Users are still having problems with their network and the Downloadspeed is now to 5 Mbps download and 13 Mbps upload.
Hoping for another reply. Sincerely yours, Mikey van der Worp Utelisys Communications B.V. Trinity Buildings Tower A, 7th floor Pietersbergweg 15 1105 BM Amsterdam Tel: +31 - 20 - 561 8010 Fax: +31 - 20 - 561 8021 Mob: +31 6 2942 2052 Fb: Utelisys-Communications-BV<http://www.facebook.com/pages/Utelisys-Communications-BV/126072600854665> www.utelisys.com<http://www.utelisys.com> - <http://www.utelisys.com/> Van: [email protected] [mailto:[email protected]] Namens Jeremy Martijn Verzonden: maandag 5 november 2012 12:42 Aan: [email protected] Onderwerp: [pfSense] Bandwidth limiter Good morning, I have a question regarding the bandwidth limiter on pfsense. Im going to describe the current situation and what I have done so far. I want to limit every user on the network to a 20Mbit/s down/10Mbit/s upload speed and the whole network should have a 100Mbit/s download and upload speed. Limiter made Limit_In at 20Mbit/s and Limit_Out on 10Mbit/s. Firewall Rule on the LAN, with Interface LAN, Protocol TCP/UDP, Source type LAN subnet and In/Out set to Limit_Out and Limit_In. When I do a speedtest I get the 20/10 speed as I have configured it, but what I'm doubting of is this speed now set per user or for the LAN subnet? What will happen if more users connect to the LAN subnet? And if I want to limit the Whole bandwidth speed of the pipe to 100Mbit/s, how would I need to make a rule for that? Uplink is 100Mbit's Speed per user 20Mbit/s download 10Mbit's upload on LAN subnet. Thanks in advance. Sincerely yours, Jeremy Martijn
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
