Hi, Thanks, I have been searching for this for years. Kindly describe if I have different total download and upload bandwidth.
Regards, Nabeel > From: [email protected] > To: [email protected] > Date: Sat, 27 Jul 2013 15:20:16 +0200 > Subject: Re: [pfSense] Dynamic Bandwidth Limiting with pfSense > > I spoke/asked to soon :) > > > Currently I am testing what you suggested Ermal it seems to do the > trick. > > > Odhiambo here is what you need to do: > > Firewall->Traffic Shaper->Limiter: > Create a new limiter > - Enabled > - Name: TotalIN > - Bandwidth: (Enter your total line download limit, for example 5Mbit/s) > - Mask: none > Save > Apply > Click on the new created Limit and then click on > Add New Queue > - Enabled > - Name: PerUserIN > - Mask: Source addresses > Save > Apply > > Do all the above again for the OUT Limit: > > Create a new limiter > - Enabled > - Name: TotalOUT > - Bandwidth: (Enter your total line upload limit, for example 1Mbit/s) > - Mask: none > Save > Apply > Click on the new created Limit and then click on > Add New Queue > - Enabled > - Name: PerUserOUT > - Mask: Destination addresses > Save > Apply > > After that, go to the rule you use to allow traffic to the internet and > edit the rule. > Go to advanced-> In/Out and set the first to PerUserIN and the second to > PerUserOUT > Save > Apply > > > > That is what Ermal suggests and what I am currently testing out. > If I made any mistake in this how-to please let me know! > > Vassilis > > > _______________________________________________ > List mailing list > [email protected] > http://lists.pfsense.org/mailman/listinfo/list
_______________________________________________ List mailing list [email protected] http://lists.pfsense.org/mailman/listinfo/list
