I’m still running 2.1.5 as the 2.2 series has not been happy on my soekris
boxes. Will test again soon.
I’ve also stopped seeing any performance benefit from the hifn encryption card
for any of my uses. Perhaps you see different, but the only supported
encryption on that card (aes-cbc) is no longer favored as cbc has some tendency
to leak bits of information if attacked. The Geode CPU has nearly the same
hardware acceleration capabilities, so I’d abandon the hifn card.
ED.
> On 2015, May 18, at 8:58 AM, Nenhum_de_Nos <[email protected]> wrote:
>
> On Thu, 30 Apr 2015 08:30:24 -0300
> Nenhum_de_Nos <[email protected]> wrote:
>
>> On Tue, 28 Apr 2015 09:56:28 -0300
>> Nenhum_de_Nos <[email protected]> wrote:
>>
>>> Hi,
>>>
>>> Are there any known issues in this couple ?
>>>
>>> Since I updated to 2.2.x (never tried 2.2, just 2.2.1 and 2.2.2) I get a
>>> freeze when I access WebUI when uptime is past a little minutes. I was
>>> logged in via ssh, and the console got until this:
>>>
>>>
>>> Message from syslogd@cygnus at Apr 28 09:46:53 ...
>>> cygnus php-fpm[287]: /index.php: Successful login for user 'admin' from:
>>> 127.0.0.1
>>>
>>> and after that it is dead. Seen it when at home some times, and now got it
>>> remote (need to arrive back home to power cycle it).
>>>
>>> I will try to downgrade to 2.1.5 and see if it is the same behaviour.
>>>
>>> Has anyone seen something alike ?
>>>
>>> thanks,
>>>
>>> matheus
>>
>> Hi again,
>>
>> I have been trying all kinds of stuff on this, no good news though.
>>
>> I changed PSU, changed harddisk (was CF card, changed CF card, changed to
>> harddisk), turned off an atheros pci AP, nothings seems to solve this.
>> Today, after some hours up, I tried to access the webui and it god locked
>> again.
>>
>> I will try the 2.1.5 version and then move back to vanila FreeBSD.
>>
>> If anyone have any hints, saw this elsewhere, please share :)
>>
>> this was a rock solid box, used to have 200+ days uptime. Now can't see the
>> sun rise twice :(
>>
>> thanks,
>>
>> matheus
>
> Hi, still no hope in here.
>
> I installed a 2.1.1 i386 nanobsd from scratch on another CF, had it running
> for some days and had no problem. Once I saw it stable, I tried the 2.2.2
> i386 nanobsd, again, from the image and no old config reused. When I saw it
> stable for some time, around one day time, I tried the dual iperf test (two
> internet cable providers, 10Mbps and 5Mbps). Then after one night of iperf
> all along, I tried to log in on webui, and got the same crash as before. The
> serial console got me this:
>
> [2.2.2-RELEASE][[email protected]]/root:
> Message from syslogd@xxx at May 17 20:08:00 ...
> cygnus php-fpm[5321]: /index.php: Successful login for user 'admin' from:
> 10.1.1.90
> hifn0: rndtest: zeros interval 1 failed (2676, 2343-2657)
> hifn0: rndtest: zeros interval 1 failed (2342, 2343-2657)
> hifn0: rndtest: zeros interval 4 failed (384, 251-373)
>
> Message from syslogd@xxx at May 18 07:37:
>
> and then dead ...
>
> no ping answers, no http.
>
> By that time, no routing was done and I had to pull the power plug.
>
> So far, 2.1.x works but 2.2.x doesn't.
>
> has anyone seen this also using two cable ISP's ?
>
> I will go back to 2.1.5 and try.
>
> thanks (for no answer, so far :( )
>
> matheus
>
> ps: this is a net5501-70 from soekris, using 3 types of CF cards so far.
>
> --
> "We will call you Cygnus,
> the God of balance you shall be."
> _______________________________________________
> pfSense mailing list
> https://lists.pfsense.org/mailman/listinfo/list
> Support the project with Gold! https://pfsense.org/gold
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
