I think I am good now .. I have delete the sync interface and then recreate
it ... All look good now and system is syncing beetween each-other.
One more question, can we change the frequency of the sync ? Look like the
default is ~10min
( o o )
2016-10-13 12:13 GMT-04:00 Steve Yates <st...@teamits.com>:
> What version pfSense? We are on 2.3.2 without the latest patch (2.3.2_1),
> using CARP/sync, since whatever version was in spring 2015, and haven't had
> this issue.
> Steve Yates
> ITS, Inc.
> -----Original Message-----
> From: List [mailto:list-boun...@lists.pfsense.org] On Behalf Of Luc Paulin
> Sent: Thursday, October 13, 2016 10:11 AM
> To: pfSense Support and Discussion Mailing List <email@example.com>
> Subject: Re: [pfSense] pfsense in ha - sync interface rule disapear
> Rule is disapearing on the slave only ...
> Yes both firewall's interface's description are the same and assign to the
> same interface...
> ( o o )
> Luc Paulin
> email: paulinster(at)gmail.com
> Skype: paulinster
> 2016-10-13 11:00 GMT-04:00 Steve Yates <st...@teamits.com>:
> > Are your rules disappearing on the slave, the master, or both?
> > Brainstorming, do both have the same name for the pfsync interface?
> > Meaning the slave isn't named PFSYNC-SLAVE or something like that?
> > --
> > Steve Yates
> > ITS, Inc.
> > -----Original Message-----
> > From: List [mailto:list-boun...@lists.pfsense.org] On Behalf Of Luc
> > Paulin
> > Sent: Thursday, October 13, 2016 9:10 AM
> > To: firstname.lastname@example.org
> > Subject: [pfSense] pfsense in ha - sync interface rule disapear
> > Hi Everyone,
> > I am new to pfsense and I have to say to that I am very impressed to
> > see all the feature available out of box.
> > I am currently testing it to see how well it work and perform for our
> > environement. We would like to replace our HA linux firewall running
> > IPTable/fwbuiler scripts. Currently trying to setup the HA but having
> > hard time to make it work properly. I am following the wiki guide (
> > https://doc.pfsense.org/index.php/Configuring_pfSense_
> > Hardware_Redundancy_(CARP)
> > ).
> > The issue that I have is that the rule I added on both firewall to
> > allow SYNC interface to communicate keep disapear on the slave
> > firewall once the connection got established. So XMLRPC did copy
> > rules from master to slave, but the PFSYNC interface rules disapear,
> > therefore this cause communication issue after
> > (/rc.filter_synchronize: New alert found: A communications error
> > occurred while attempting XMLRPC sync with username admin
> > https://172.16.199.2:443.)
> pfSense mailing list
> Support the project with Gold! https://pfsense.org/gold
pfSense mailing list
Support the project with Gold! https://pfsense.org/gold