DHCPv6 relay from WebUI does not work.
I was able to successfully get the v6 working from Command line (ssh to
pfsense box and run the command)
I had to issue the following command to get it going.
*# /usr/local/sbin/dhcp6relay -d -r fd22:db8::290:fbff:fe34:5aed igb1*
If you are using a ISC DHCP Server, then
*# more /var/lib/dhcp6/db/dhcpd6.leases*
# The format of this file is documented in the dhcpd.leases(5) manual page.
# This lease file was written by isc-dhcp-4.3.3
server-duid "\000\001\000\001\037\276\311\006\000\220\3734Z\355";
ia-na "\000\261\021\304\000\001\000\001\037\237g`RT\000\261\021\304" {
cltt 3 2016/11/16 17:22:54;
iaaddr fd22:db8:0:0:ffff:: {
binding state active;
preferred-life 604800;
max-life 2592000;
ends 5 2016/12/16 17:22:54;
}
}
server-duid "\000\001\000\001\037\276\311\006\000\220\3734Z\355";
ia-na "\000\261\021\304\000\001\000\001\037\237g`RT\000\261\021\304" {
cltt 3 2016/11/16 18:22:54;
iaaddr fd22:db8:0:0:ffff:: {
binding state active;
preferred-life 604800;
max-life 2592000;
ends 5 2016/12/16 18:22:54;
}
}
ia-na "\001\000\000\000\000\001\000\001\035X\023B\254\2742{/\363" {
cltt 3 2016/11/16 18:56:23;
iaaddr fd22:db8::fffe:e050:603f:42a5 {
binding state active;
preferred-life 1620000;
max-life 2592000;
ends 5 2016/12/16 18:56:23;
}
}
ia-na "\001\000\000\000\000\001\000\001\035X\023B\254\2742{/\363" {
cltt 3 2016/11/16 18:56:24;
iaaddr fd22:db8::fffe:e050:603f:42a5 {
binding state active;
preferred-life 1620000;
max-life 2592000;
ends 5 2016/12/16 18:56:24;
}
}
On Wed, Nov 16, 2016 at 9:40 AM, Shivaram Mysore <[email protected]>
wrote:
> dhcpv6 relay does not start.
>
> Here is more info:
>
> Version 2.3.2-RELEASE-p1 (amd64)
> built on Tue Sep 27 12:13:07 CDT 2016
> FreeBSD 10.3-RELEASE-p9
>
>
>
>
> WAN <https://10.10.22.1/interfaces.php?if=wan> 100baseTX <full-duplex>
> 192.168.15.4
> LAN <https://10.10.22.1/interfaces.php?if=lan> 1000baseT <full-duplex>
> 10.10.22.1
> fd22:db8:0:0:ff10::2201
>
> On Tue, Nov 15, 2016 at 11:45 PM, Shivaram Mysore <
> [email protected]> wrote:
>
>> Hello,
>> I have a separate DHCP sever and am running both v4 & v6 servers on the
>> same eth1 interface.
>>
>> On pfSense, I have one LAN interface configured it with both v4 & v6
>> static IP addresses. I am also running DHCP v4 relay on the same. v4
>> relay works fine. v6 relay, I get a syslog message:
>>
>> /services_dhcpv6_relay.php: No suitable interface found for running
>> dhcrelay -6!
>>
>> What could be an issue here?
>>
>> Thanks
>>
>> /Shivaram
>>
>
>
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
