Are you running the most current? I ask only as a web developer - and some of the Rubicon team monitors this list and they will ask that question.
> On Nov 16, 2016, at 1:28 PM, Shivaram Mysore <shivaram.mys...@gmail.com> > wrote: > > DHCPv6 relay from WebUI does not work. > > I was able to successfully get the v6 working from Command line (ssh to > pfsense box and run the command) > > I had to issue the following command to get it going. > > *# /usr/local/sbin/dhcp6relay -d -r fd22:db8::290:fbff:fe34:5aed igb1* > > If you are using a ISC DHCP Server, then > > *# more /var/lib/dhcp6/db/dhcpd6.leases* > > # The format of this file is documented in the dhcpd.leases(5) manual page. > # This lease file was written by isc-dhcp-4.3.3 > > server-duid "\000\001\000\001\037\276\311\006\000\220\3734Z\355"; > > ia-na "\000\261\021\304\000\001\000\001\037\237g`RT\000\261\021\304" { > cltt 3 2016/11/16 17:22:54; > iaaddr fd22:db8:0:0:ffff:: { > binding state active; > preferred-life 604800; > max-life 2592000; > ends 5 2016/12/16 17:22:54; > } > } > > server-duid "\000\001\000\001\037\276\311\006\000\220\3734Z\355"; > > ia-na "\000\261\021\304\000\001\000\001\037\237g`RT\000\261\021\304" { > cltt 3 2016/11/16 18:22:54; > iaaddr fd22:db8:0:0:ffff:: { > binding state active; > preferred-life 604800; > max-life 2592000; > ends 5 2016/12/16 18:22:54; > } > } > > ia-na "\001\000\000\000\000\001\000\001\035X\023B\254\2742{/\363" { > cltt 3 2016/11/16 18:56:23; > iaaddr fd22:db8::fffe:e050:603f:42a5 { > binding state active; > preferred-life 1620000; > max-life 2592000; > ends 5 2016/12/16 18:56:23; > } > } > > ia-na "\001\000\000\000\000\001\000\001\035X\023B\254\2742{/\363" { > cltt 3 2016/11/16 18:56:24; > iaaddr fd22:db8::fffe:e050:603f:42a5 { > binding state active; > preferred-life 1620000; > max-life 2592000; > ends 5 2016/12/16 18:56:24; > } > } > > > On Wed, Nov 16, 2016 at 9:40 AM, Shivaram Mysore <shivaram.mys...@gmail.com> > wrote: > >> dhcpv6 relay does not start. >> >> Here is more info: >> >> Version 2.3.2-RELEASE-p1 (amd64) >> built on Tue Sep 27 12:13:07 CDT 2016 >> FreeBSD 10.3-RELEASE-p9 >> >> >> >> >> WAN <https://10.10.22.1/interfaces.php?if=wan> 100baseTX <full-duplex> >> 192.168.15.4 >> LAN <https://10.10.22.1/interfaces.php?if=lan> 1000baseT <full-duplex> >> 10.10.22.1 >> fd22:db8:0:0:ff10::2201 >> >> On Tue, Nov 15, 2016 at 11:45 PM, Shivaram Mysore < >> shivaram.mys...@gmail.com> wrote: >> >>> Hello, >>> I have a separate DHCP sever and am running both v4 & v6 servers on the >>> same eth1 interface. >>> >>> On pfSense, I have one LAN interface configured it with both v4 & v6 >>> static IP addresses. I am also running DHCP v4 relay on the same. v4 >>> relay works fine. v6 relay, I get a syslog message: >>> >>> /services_dhcpv6_relay.php: No suitable interface found for running >>> dhcrelay -6! >>> >>> What could be an issue here? >>> >>> Thanks >>> >>> /Shivaram >>> >> >> > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold