Yes - I am running the latest. Thanks
/Shivaram ::Sent from my mobile device:: > On Nov 16, 2016, at 12:10 PM, Ryan Coleman <[email protected]> wrote: > > Are you running the most current? > > I ask only as a web developer - and some of the Rubicon team monitors this > list and they will ask that question. > > > >> On Nov 16, 2016, at 1:28 PM, Shivaram Mysore <[email protected]> >> wrote: >> >> DHCPv6 relay from WebUI does not work. >> >> I was able to successfully get the v6 working from Command line (ssh to >> pfsense box and run the command) >> >> I had to issue the following command to get it going. >> >> *# /usr/local/sbin/dhcp6relay -d -r fd22:db8::290:fbff:fe34:5aed igb1* >> >> If you are using a ISC DHCP Server, then >> >> *# more /var/lib/dhcp6/db/dhcpd6.leases* >> >> # The format of this file is documented in the dhcpd.leases(5) manual page. >> # This lease file was written by isc-dhcp-4.3.3 >> >> server-duid "\000\001\000\001\037\276\311\006\000\220\3734Z\355"; >> >> ia-na "\000\261\021\304\000\001\000\001\037\237g`RT\000\261\021\304" { >> cltt 3 2016/11/16 17:22:54; >> iaaddr fd22:db8:0:0:ffff:: { >> binding state active; >> preferred-life 604800; >> max-life 2592000; >> ends 5 2016/12/16 17:22:54; >> } >> } >> >> server-duid "\000\001\000\001\037\276\311\006\000\220\3734Z\355"; >> >> ia-na "\000\261\021\304\000\001\000\001\037\237g`RT\000\261\021\304" { >> cltt 3 2016/11/16 18:22:54; >> iaaddr fd22:db8:0:0:ffff:: { >> binding state active; >> preferred-life 604800; >> max-life 2592000; >> ends 5 2016/12/16 18:22:54; >> } >> } >> >> ia-na "\001\000\000\000\000\001\000\001\035X\023B\254\2742{/\363" { >> cltt 3 2016/11/16 18:56:23; >> iaaddr fd22:db8::fffe:e050:603f:42a5 { >> binding state active; >> preferred-life 1620000; >> max-life 2592000; >> ends 5 2016/12/16 18:56:23; >> } >> } >> >> ia-na "\001\000\000\000\000\001\000\001\035X\023B\254\2742{/\363" { >> cltt 3 2016/11/16 18:56:24; >> iaaddr fd22:db8::fffe:e050:603f:42a5 { >> binding state active; >> preferred-life 1620000; >> max-life 2592000; >> ends 5 2016/12/16 18:56:24; >> } >> } >> >> >> On Wed, Nov 16, 2016 at 9:40 AM, Shivaram Mysore <[email protected]> >> wrote: >> >>> dhcpv6 relay does not start. >>> >>> Here is more info: >>> >>> Version 2.3.2-RELEASE-p1 (amd64) >>> built on Tue Sep 27 12:13:07 CDT 2016 >>> FreeBSD 10.3-RELEASE-p9 >>> >>> >>> >>> >>> WAN <https://10.10.22.1/interfaces.php?if=wan> 100baseTX <full-duplex> >>> 192.168.15.4 >>> LAN <https://10.10.22.1/interfaces.php?if=lan> 1000baseT <full-duplex> >>> 10.10.22.1 >>> fd22:db8:0:0:ff10::2201 >>> >>> On Tue, Nov 15, 2016 at 11:45 PM, Shivaram Mysore < >>> [email protected]> wrote: >>> >>>> Hello, >>>> I have a separate DHCP sever and am running both v4 & v6 servers on the >>>> same eth1 interface. >>>> >>>> On pfSense, I have one LAN interface configured it with both v4 & v6 >>>> static IP addresses. I am also running DHCP v4 relay on the same. v4 >>>> relay works fine. v6 relay, I get a syslog message: >>>> >>>> /services_dhcpv6_relay.php: No suitable interface found for running >>>> dhcrelay -6! >>>> >>>> What could be an issue here? >>>> >>>> Thanks >>>> >>>> /Shivaram >>>> >>> >>> >> _______________________________________________ >> pfSense mailing list >> https://lists.pfsense.org/mailman/listinfo/list >> Support the project with Gold! https://pfsense.org/gold > > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
