On 09/01/2018 14:34, Roberto Carna wrote:
Dear, I have an Asterisk PBX in a DMZ behind a pfSense and a remote
peer out of the pfSense. I connect PBX and Peer in order to establish
a SIP trunk.
In the path "PBX -- pfSense -- SIP trunk peer" there is no NAT at all.
So we have generated two firewall rules:
PBX --> SIP Peer with ANY
SIP Peer --> PBX with ANY
When you say any, is it a bit unclear, Protocol any? or TCP any, UDP any?
Could you elaborate on the exact rules you have set up?
But often the SIP packets coming from the SIP Peer don't cross the
pfSEnse to PBX. The packets never reach my PBX.
Is there any feature I have to enable/disable in pfSense in order to
work with SIP protocol to have established the SIP trunk ???
The SIP trunk provider tell me that the SIP Options they send me are
not responded by us.
Thanks a lot,
ROBERT
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
