Have you tried 2.4.2 ? --
The fact that there's a highway to Hell but only a stairway to Heaven says a lot about anticipated traffic volume. > On Jan 30, 2018, at 02:57, Fabian Bosch <[email protected]> wrote: > > Hello, > > I cannot switch from Version 2.3.3 to 2.4.1 because of the routing at the > same interface. > I transfered the backup.xml from machine A (2.3.3) to machine B (2.4.1) and > everything worked fine but the routing between Subnets assigned at > LAN-Interface. > There are multiple subnets set up via VirtualIPs and there are static routes > to each of the subnets via the native LAN-Gateway Adress e.g route > 192.168.110.0/24 via GW_LAN(192.168.100.1) and assigned VirtualIP in this > case 192.168.110.1 > Since this configuration runs well on 2.3.3 I wanted to ask whether there are > major changes in default handling of traffic at the same interface. In 2.3.3 > you don't need firewall-rules to allow traffic between subnets at the same > interface - did this change in 2.4.1? > > Thanks! > > Fabian > _______________________________________________ > pfSense mailing list > https://lists.pfsense.org/mailman/listinfo/list > Support the project with Gold! https://pfsense.org/gold _______________________________________________ pfSense mailing list https://lists.pfsense.org/mailman/listinfo/list Support the project with Gold! https://pfsense.org/gold
