Hi Fabian,
Have you set?:
System/Advanced/Firewall & NAT: "Static route filtering, Bypass firewall
rules for traffic on the same interface"
As for your 'static routes', i'm not sure what purpose they serve..
Routing between subnets known on a pfSense interface is 'automatic'.
Regards,
PiBa-NL
Op 30-1-2018 om 9:57 schreef Fabian Bosch:
Hello,
I cannot switch from Version 2.3.3 to 2.4.1 because of the routing at
the same interface.
I transfered the backup.xml from machine A (2.3.3) to machine B
(2.4.1) and everything worked fine but the routing between Subnets
assigned at LAN-Interface.
There are multiple subnets set up via VirtualIPs and there are static
routes to each of the subnets via the native LAN-Gateway Adress e.g
route 192.168.110.0/24 via GW_LAN(192.168.100.1) and assigned
VirtualIP in this case 192.168.110.1
Since this configuration runs well on 2.3.3 I wanted to ask whether
there are major changes in default handling of traffic at the same
interface. In 2.3.3 you don't need firewall-rules to allow traffic
between subnets at the same interface - did this change in 2.4.1?
Thanks!
Fabian
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
_______________________________________________
pfSense mailing list
https://lists.pfsense.org/mailman/listinfo/list
Support the project with Gold! https://pfsense.org/gold
