No I have given up at the moment. I don't have enough knowledge on how to fix it. I strongly suspect it is due to a setup error. I had a similar problem in the past .It went away after I re-installed wss after a server re-install. I hadn't used SPD used it for a while, and it has come back. Between times, I have restored SP from a backup, and have had a lot of little problems that I have fixed by mucking around with wss.
I have been tracking down all the errors in my event log, and hoping that fixing all of these might eventually fix the problem with SPD. Previously I had to save the page I was working on after any change to avoid a crash. I think the culprit is either permission on my database server, or .net. I strongly suspect it is .net When I am less busy, I will do a complete re-install, and check if SPD is working, and then restore from backup top see if it works after that. During my research, I found a suggestion that if it was the SPD installation, there might be an issue if you have several versions of office, i.e. 2003. I will post if I have success. Cheers Craig From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Crabbe, David Sent: Friday, June 20, 2008 12:15 PM To: listserver@ozMOSS.com Subject: RE: [OzMOSS] SharePoint designer crashes Did you ever resolve this issue? I'm having severe problems with SPD falling over regularly any time I modify a web part page. I installed SP1 and still the problem persists. Thanks, David. David Crabbe Consultant Web Solutions Team Fujitsu Australia Ltd T: +61 8 9268 1505 E: [EMAIL PROTECTED] ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Craig Stevens Sent: Wednesday, 4 June 2008 1:31 PM To: listserver@ozMOSS.com Subject: [OzMOSS] SharePoint designer crashes Hello I am still having this problem, and can now devote some time to tracking it down. I don't know whether it is my installation of SPD, or my setup of WSS. Does anyone use SPD, and is willing to help me? If you could log onto a test site on my server, and do a couple of simple things to it, please reply off list to me and I will give you login details. Cheers Craig ------------------------------------------------------------------- OzMOSS.com - to unsubscribe from this list, send a message back to the list with 'unsubscribe' as the subject. Powered by mailenable.com This is an email from Fujitsu Australia Limited, ABN 19 001 011 427. It is confidential to the ordinary user of the email address to which it was addressed and may contain copyright and/or legally privileged information. No one else may read, print, store, copy or forward all or any of it or its attachments. If you receive this email in error, please return to sender. Thank you. If you do not wish to receive commercial email messages from Fujitsu Australia Limited, please email [EMAIL PROTECTED] ------------------------------------------------------------------- OzMOSS.com - to unsubscribe from this list, send a message back to the list with 'unsubscribe' as the subject. Powered by mailenable.com ------------------------------------------------------------------- OzMOSS.com - to unsubscribe from this list, send a message back to the list with 'unsubscribe' as the subject. Powered by mailenable.com
