Hi, I finally got a chance to download the new 6.2-pre4 cd today and it
booted fairly well in my old AMD k6-2 300mhz laptop with 128mb ram.
Pcmcia was found and dialup worked. Looks like maybe I can start this
time. I am having a very slow load though, due to, I think, a cdrom
problem. When it first began occurring I thought the boot would fail
but somehow it kept pulling it out and finnally finished. Took about 10
minutes. Startx was fun too:)
dmesg shows what I was seeing. Below is where the first error occurs in
the boot and was repeated about 18 , 8 , and 13 times on 3 different
boots.
What may be some things to try to get this to run better?
Try burning another cd from the iso? or could this be my cdrom......
Thanks,Howard
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 288k freed
ISO 9660 Extensions: RRIP_1991A
input: PS2++ Logitech TouchPad 3 as /class/input/input1
---------below is the first two errors of a total of about 40
-----------------------
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 352
zisofs: Failed to read block table, inode = 1547, block = 53
hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdc: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdc, sector 416
zisofs: Failed to read block table, inode = 1547, block = 69
--
http://linuxfromscratch.org/mailman/listinfo/livecd
FAQ: http://www.linuxfromscratch.org/faq/
Unsubscribe: See the above information page
