Hi,
I would like to record my bass (a real bass instrument) with Muse3. I have
never done hard disk recording before. A friend of mine gave me a Behringer
Guitar Link (guitar usb interface) UC6102. I told him that this device will
probably not work under Linux/Ubuntu Studio.
But I thought "Let's give it a try" and plugged it into my computer while
Muse3 (latest version from the git repository) was running. Then I created two
tracks in Muse3:
a) an Input track
b) a Wave track
I ensured that both tracks refer to the same channel.
Then I increased Gain in the Wave track, clicked the Record and Play button
and played on my bass.
But nothing was recorded in the Wave track.
---
The Behringer Guitar Link gets detected in my Ubuntu Studio 16.04.2
installation:
This is the output of dmesg:
=== Quote Beginning ===
[ 2973.654059] usb 6-3: new full-speed USB device number 2 using ohci-pci
[ 2973.807405] usb 6-3: New USB device found, idVendor=08bb, idProduct=2902
[ 2973.807413] usb 6-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2973.807416] usb 6-3: Product: USB Audio CODEC
[ 2973.807419] usb 6-3: Manufacturer: Burr-Brown from TI
[ 2973.816532] input: Burr-Brown from TI USB Audio CODEC as
/devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.3/0003:08BB:2902.0004/input/input8
[ 2973.868574] hid-generic 0003:08BB:2902.0004: input,hidraw3: USB HID v1.00
Device [Burr-Brown from TI USB Audio CODEC ] on
usb-0000:00:13.1-3/input3
[ 2974.167403] usbcore: registered new interface driver snd-usb-audio
=== Quote End ===
This is the content of /proc/asound/cards:
=== Quote Beginning ===
0 [Live ]: EMU10K1 - SB Live! 5.1
SB Live! 5.1 (rev.7, serial:0x80641102) at 0xcf00, irq
20
1 [CODEC ]: USB-Audio - USB Audio CODEC
Burr-Brown from TI USB Audio CODEC at
usb-0000:00:13.1-3, full speed
=== Quote End ===
The command arecord -L shows among other things:
=== Quote Beginning ===
plughw:CARD=CODEC,DEV=0
USB Audio CODEC, USB Audio
Hardware device with all software conversions
=== Quote End ===
So the Guitar Link device is recognized as a sound (card) device by Ubuntu
Studio 16.04.2
But in the "Connections" window, on the "Audio" tab, of qjackctl the Guitar
link device is not shown.
---
Is there a way to record my bass with Muse3 using the Behringer Guitar Link
device?
Regards,
Jens
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Lmuse-user mailing list
Lmuse-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/lmuse-user
