Hi Tim, Thanks for your information. I had already looked into that forum thread at
https://ubuntuforums.org/showthread.php?t=1457334 , but I was not aware of that this forum thread might be a solution. I am still a kind of beginner in terms of music generation under Linux, sorry. I am still learning. Well, that forum thread that you told me to look into tells me to change the settings in qjackctl. I did that, i.e. I speciefied there "hw:Live" as the output device, and "hw:CODEC,0" as the input device. But then in MusE recording my bass with the Behringer Guitar Link does not produce any sound in the Wave track. Ubuntu Studio 16.04 has a programme which displays among other things input and output devices. This programme can be accessed via the task bar (located at the top) with a click on that loudspeaker symbol left to the displayed date and time. This programme shows the following entry on the output and input device tab when I plug the Behringer Guitar Link into an USB slot: "PCM2902 Audio Codec Analog Stereo". It is set to 100% (0 dB) I think this information does not help further. > SBLive card eh? Yes, I currently cannot afford a new sound card, but hopefully at a later time. I hope it wasn't desaster for you to fix all these bugs in the SB driver. Regards, Jens Am Freitag, 30. Juni 2017, 01:40:19 schrieb Tim: > There's something about setting Jack to hw:default here: > https://ubuntuforums.org/showthread.php?t=1457334 > > SBLive card eh? Make sure Jack tries to use the Behringer > card instead of the SB card. > > I fixed a bunch o' bugs in that SB driver and accompanying > DSP loader and gui utilities several years ago. Quite a challenge. > > Tim. > > On 06/29/2017 08:33 AM, Jens Radloff wrote: > > Hi, > > > > I would like to record my bass (a real bass instrument) with Muse3. I have > > never done hard disk recording before. A friend of mine gave me a > > Behringer > > Guitar Link (guitar usb interface) UC6102. I told him that this device > > will > > probably not work under Linux/Ubuntu Studio. > > > > But I thought "Let's give it a try" and plugged it into my computer while > > Muse3 (latest version from the git repository) was running. Then I created > > two tracks in Muse3: > > > > a) an Input track > > b) a Wave track > > > > I ensured that both tracks refer to the same channel. > > > > Then I increased Gain in the Wave track, clicked the Record and Play > > button > > and played on my bass. > > > > But nothing was recorded in the Wave track. > > > > --- > > > > The Behringer Guitar Link gets detected in my Ubuntu Studio 16.04.2 > > installation: > > > > This is the output of dmesg: > > > > === Quote Beginning === > > > > [ 2973.654059] usb 6-3: new full-speed USB device number 2 using ohci-pci > > [ 2973.807405] usb 6-3: New USB device found, idVendor=08bb, > > idProduct=2902 > > [ 2973.807413] usb 6-3: New USB device strings: Mfr=1, Product=2, > > SerialNumber=0 > > [ 2973.807416] usb 6-3: Product: USB Audio CODEC > > [ 2973.807419] usb 6-3: Manufacturer: Burr-Brown from TI > > [ 2973.816532] input: Burr-Brown from TI USB Audio CODEC as > > /devices/pci0000:00/0000:00:13.1/usb6/6-3/6-3:1.3/0003:08BB:2902.0004/inpu > > t/input8 [ 2973.868574] hid-generic 0003:08BB:2902.0004: input,hidraw3: > > USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] > > on > > usb-0000:00:13.1-3/input3 > > [ 2974.167403] usbcore: registered new interface driver snd-usb-audio > > > > === Quote End === > > > > This is the content of /proc/asound/cards: > > > > === Quote Beginning === > > > > 0 [Live ]: EMU10K1 - SB Live! 5.1 > > > > SB Live! 5.1 (rev.7, serial:0x80641102) at 0xcf00, > > irq > > > > 20 > > > > 1 [CODEC ]: USB-Audio - USB Audio CODEC > > > > Burr-Brown from TI USB Audio CODEC at > > > > usb-0000:00:13.1-3, full speed > > > > === Quote End === > > > > The command arecord -L shows among other things: > > > > === Quote Beginning === > > > > plughw:CARD=CODEC,DEV=0 > > > > USB Audio CODEC, USB Audio > > Hardware device with all software conversions > > > > === Quote End === > > > > So the Guitar Link device is recognized as a sound (card) device by Ubuntu > > Studio 16.04.2 > > > > But in the "Connections" window, on the "Audio" tab, of qjackctl the > > Guitar > > link device is not shown. > > > > --- > > > > Is there a way to record my bass with Muse3 using the Behringer Guitar > > Link > > device? > > > > Regards, > > > > Jens > > > > -------------------------------------------------------------------------- > > ---- Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Lmuse-user mailing list > > Lmuse-user@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/lmuse-user > > ---------------------------------------------------------------------------- > -- Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Lmuse-user mailing list > Lmuse-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/lmuse-user ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Lmuse-user mailing list Lmuse-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/lmuse-user
