The 1st 1200 bytes of the file are all zero (AKA 0x00) immediately after that you have the normal ESC code for some PJL stuff
Try stripping off just those bytes or get http://www.scs.ryerson.ca/mforrest/printing/Job927-df-mf.prn In the -PCL- you don't have the ESC code to end the job.. shouldn't be a problem if the printer is set to auto personality, but I've always seen it there. If you just strip the zeros from the start of the file I'm guessing it will work fine. I haven't tried printing it 'cause I'm lazy right now and don't want to have to walk to the printer :) mATT ************************************************************************* A neurotic worries about going crazy, but never will A psychotic IS crazy, but doesn't worry about it! ....... Don't worry, be happy!!! >:} ************************************************************************* ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
