David Bear wrote: > > I have a jetdirect J3111A card. It seems to constantly crash dump, > even when NO print jobs are being sent to it. Yesterday, I updated > the firmware using the jetadmin tool from HP. Still no improvement. > > This is exception 0004 > firmware rev g.05.35 > > I don't think the register dump would be terrible useful but will > post it if needed. > > The interface is plugged into an hp laserjet 4600 (color) but it seems > that just sitting on the network will cause this. > > anyone have any advice?
We've recently had to replace two Jetdirect cards for two HP4600s. They went down after attempts to upload new jd-firmware. Luckily, HP sent them for no extra cost, and the support lad I talked to mumbled something about a series of cards with known errors. Don't know if this is related to your problems at all, just thought I'd mention it..... But as David said, isolating the cards from the net is a good idea. Most modern cards can control IP access... regards, -- Hans Peter (Usit/Unix-drift,Utskrift) Ni! All utvikling handler om at ting blir enklere. Vi ser da bort fra den utviklingen som har sine egne brukerst�tteordninger. -- Knut N�rum ----------------------------------------------------------------------------- YOU MUST BE A LIST MEMBER IN ORDER TO POST TO THE LPRNG MAILING LIST The address you post from MUST be your subscription address If you need help, send email to [EMAIL PROTECTED] (or lprng-requests or lprng-digest-requests) with the word 'help' in the body. For the impatient, to subscribe to a list with name LIST, send mail to [EMAIL PROTECTED] with: | example: subscribe LIST <mailaddr> | subscribe lprng-digest [EMAIL PROTECTED] unsubscribe LIST <mailaddr> | unsubscribe lprng [EMAIL PROTECTED] If you have major problems, send email to [EMAIL PROTECTED] with the word LPRNGLIST in the SUBJECT line. -----------------------------------------------------------------------------
