Hi Hugo,
You need to make sure the settings you put into .ltibrc for your proxy
are correct.
The message below:
Processing: rpm-fs
====================
Build path taken because: no prebuilt rpm,
Testing network connectivity for gpp
No network download connection available
Shows that the test for network connectivity failed.
You could try running ./ltib -v this will spew out a lot more
information but may reveal what is not set-up correctly.
Regards, Stuart
On 05/07/11 15:17, hugo Alexandre wrote:
Stuart,
I ran this command you wrote, and I've run command below to install
Authen/NTLM module too:
sudo dpkg -i libauthen-ntlm-perl_1.08-1_all.deb
This solved Authen/NTLM problem.
But I'm still not able to build LTIB. Now I'm getting the following
erro message:
Processing platform: host support
===================================
Processing: rpm-fs
====================
Build path taken because: no prebuilt rpm,
Testing network connectivity for gpp
No network download connection available
Can't get: rpm-4.0.4.tar.gz at ./ltib line 821.
Died at ./ltib line 2498.
traceback:
main::check_rpm_setup:2498
main::host_checks:1483
main:548
Started: Tue Jul 5 09:17:59 2011
Ended: Tue Jul 5 09:18:00 2011
Elapsed: 1 seconds
Use of uninitialized value in concatenation (.) or string at ./ltib
line 2818.
Use of uninitialized value in concatenation (.) or string at ./ltib
line 2818.
VERSION : 10.1.1
CVS_VERSION : $Revision: 1.75 $ (Savannah)
PLATFORM : host
GNUTARCH : i686
TOOLCHAIN :
TOOLCHAIN_CFLAGS :
These packages failed to build:
rpm-fs
Build Failed
And apparently my internet connection is OK now.
Thanks in Advance,
Hugo A. Gabardo
2011/7/5 Stuart Hughes <[email protected] <mailto:[email protected]>>
Try:
sudo apt-get install libwww-perl
On 05/07/11 08:46, Stuart Hughes wrote:
Hi Hugo,
Why can't you install it, what distro are you on?
Regards, Stuart
On 04/07/11 21:47, hugo Alexandre wrote:
Hi Stuart,
The Authen/NTLM module (libauthen-ntlm-perl) isn't able to
install on my synaptic package list. Are there another package
that I could use?
Thank,
Hugo A. Gabardo
2011/7/2 Stuart Hughes <[email protected] <mailto:[email protected]>>
Hi Hugo,
You need to install the missing Authen/NTLM perl modules for
your
machine using the package manager (synaptic/yum for example
depending on
distro).
Regards, Stuart
On 01/07/11 20:13, hugo Alexandre wrote:
> Hi Stuart,
>
> Yes, I use a proxy to access the Internet.
> I've done what you wrote (changing .ltibrc file ), and I
got the
> folowing message:
>
> Processing platform: host support
> ===================================
>
> Processing: rpm-fs
> ====================
> Build path taken because: no prebuilt rpm,
> Testing network connectivity for gpp
> No network download connection available
> Can't get: rpm-4.0.4.tar.gz at ./ltib line 821.
> Can't locate Authen/NTLM.pm in @INC (@INC contains:
> /home/user/Desktop/ltib/bin /etc/perl
/usr/local/lib/perl/5.10.1
> /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5
> /usr/lib/perl/5.10 /usr/share/perl/5.10
/usr/local/lib/site_perl .) at
> /usr/share/perl5/LWP/Authen/Ntlm.pm line 8.
> BEGIN failed--compilation aborted at
/usr/share/perl5/LWP/Authen/Ntlm.pm
> line 8.
> Compilation failed in require at (eval 26) line 3.
> ...propagated at ./ltib line 2498.
> tracebackincd
>
> main::check_rpm_setup:2498
> main::host_checks:1483
> main:548
>
>
> Started: Fri Jul 1 14:41:45 2011
> Ended: Fri Jul 1 14:41:55 2011
> Elapsed: 10 seconds
>
> Use of uninitialized value in concatenation (.) or string
at ./ltib line
> 2818.
> Use of uninitialized value in concatenation (.) or string
at ./ltib line
> 2818.
> VERSION : 10.1.1
> CVS_VERSION : $Revision: 1.75 $ (Savannah)
> PLATFORM : host
> GNUTARCH : i686
> TOOLCHAIN :
> TOOLCHAIN_CFLAGS :
>
> These packages failed to build:
> rpm-fs
>
> Build Failed
>
>
> I don't know if this info will help, but I was having the
same ploblem
> with apt-get, then I added the following lines on
file/etc/enviroment/
> and now it works fine:
>
> http_proxy="http://user:[email protected]:3128";
> ftp_proxy="http://user:[email protected]:3128";
>
> Acquire {
> HTTP::Proxy user:[email protected]:3128
<http://user:[email protected]:3128>;
> FTP::Proxy user:[email protected]:3128
<http://user:[email protected]:3128>;
> };
> alias wget="wget --proxy-user=<user>
--proxy-passwd=<password>"
>
> Thanks,
>
> Hugo A. Gabardo
>
>
> 2011/6/29 Stuart Hughes <[email protected]
<mailto:[email protected]> <mailto:[email protected]
<mailto:[email protected]>>>
>
> __
> Hi Hugo,
>
> It look like you don't have direct network
connectivity to the Internet.
>
> Are you at work? if so do you know if you normally use
a proxy to
> access the Internet? If so you'll need to set-up
proxying for LTIB
> by editing the .ltibrc file. The sections you need to
change would be:
>
> # The HTTP proxy for internet access
> # example: http://USER:[email protected]:PORT
<mailto:http://USER:[email protected]:PORT>
> <mailto:http
<mailto:http>://USER:[email protected]:PORT>
> %http_proxy
> http://USER:[email protected]:PORT
<mailto:http://USER:[email protected]:PORT>
> <mailto:http
<mailto:http>://USER:[email protected]:PORT>
>
> # For each of the sources: ppp, gpp, gpp_stage, cpp_stage
> # there is a corresponding entry that says whether or not
> # to use a proxy.
> # Valid values are: 1 : 0
>
> %gpp_proxy
> 1
>
> Obviously the %http_proxy entry needs to reflect your
environment.
>
> The quick way to find out your proxy settings is to
see if you can
> access http://bitshrine.org/ from your browser. If so
look at the
> proxy settings it is using and crib those.
>
> Regards, Stuart
>
>
>
> On 29/06/11 13:45, hugo Alexandre wrote:
>> Hi All,
>>
>> I'm trying to build LTIB for the first time on Ubuntu
10.04, and I
>> always get the same error.
>>
>> The content of host_config.log is:
>>
>> Processing platform: host support
>> ===================================
>>
>> Processing: rpm-fs
>> ====================
>> Build path taken because: no prebuilt rpm,
>> Testing network connectivity for gpp
>> No network download connection available
>> Can't get: rpm-4.0.4.tar.gz at ./ltib line 821.
>> Can't connect to bitshrine.org:80
<http://bitshrine.org:80> <http://bitshrine.org:80>
>> (connect: Connection timed out) ...propagated at
./ltib line 2498.
>> traceback:
>> main::check_rpm_setup:2498
>> main::host_checks:1483
>> main:548
>>
>>
>> Started: Wed Jun 29 08:24:29 2011
>> Ended: Wed Jun 29 08:25:00 2011
>> Elapsed: 31 seconds
>>
>> Use of uninitialized value in concatenation (.) or
string at
>> ./ltib line 2818.
>> Use of uninitialized value in concatenation (.) or
string at
>> ./ltib line 2818.
>> VERSION : 10.1.1
>> CVS_VERSION : $Revision: 1.75 $ (Savannah)
>> PLATFORM : host
>> GNUTARCH : i686
>> TOOLCHAIN :
>> TOOLCHAIN_CFLAGS :
>>
>> These packages failed to build:
>> rpm-fs
>>
>> Build Failed
>>
>> I've already searched for a solution on google, but I
couldn't
>> find anything.
>>
>>
>> Thanks in advance,
>>
>> Hugo A. Gabardo
>>
>>
>> _______________________________________________
>> LTIB home page: http://ltib.org
>>
>> Ltib mailing list
>> [email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>
>> https://lists.nongnu.org/mailman/listinfo/ltib
>
>
_______________________________________________
LTIB home page:http://ltib.org
Ltib mailing list
[email protected] <mailto:[email protected]>
https://lists.nongnu.org/mailman/listinfo/ltib
_______________________________________________
LTIB home page: http://ltib.org
Ltib mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/ltib
