I've gotten past several problems, but now it complains that it can't find XF86Config. I got the impression from the lts.conf options that it should be taken care of -- is there something I need to do here? Steve Meyers
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Steve > Meyers > Sent: Tuesday, October 02, 2001 1:56 PM > To: Jim McQuillan; [EMAIL PROTECTED] > Subject: RE: [Ltsp-discuss] Machine Check Exception > > > I'm using 2.0.9pre3 > > I've got it working more since then. According to the mknbi man > page, I can send kernel options in as tag #129. I just didn't > know how to do that. I was finally able to get that to work with > DHCP 3.0 with the following: > > option option-128 code 128 = string; > option option-129 code 129 = text; > > and then in the host specific part: > > option option-128 e4:45:74:68:0:0; > option option-129 "nomce"; > > Thanks! > > Steve Meyers > > > > -----Original Message----- > > From: Jim McQuillan [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, October 02, 2001 1:11 PM > > Subject: Re: [Ltsp-discuss] Machine Check Exception > > > > > > Steve, > > > > What version of LTSP are you using ? > > > > Jim McQuillan > > [EMAIL PROTECTED] > > > > > > > > Steve Meyers wrote: > > > > > I'm using an etherboot floppy image. When it loads the kernel, it > > > gives a "CPU#0: Machine Check Exception" over and over again, > and will > > > not boot. I've seen this before -- I just need to pass > "nomce" to the > > > kernel. How do I do that? I tried -DUSRPARMS, but it never asks for > > > the parameters. > > > > > > > > > > > > Steve Meyers > > > > > > > > > > > > > > > > > > > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
