Tom, As the LTSP workstation boots, it creates the XF86Config file in /tmp.
You could set RUNLEVEL = 3, and when you get the bash prompt on the workstation, you could go look at /tmp/XF86Config. If you've enabled NFS-Swap, then you have a read-write filesystem that you could copy the XF86Config file to, so that you'll have it on your server, and can then copy it to wherever you want. The swap filesystem is /var/opt/ltsp/swapfiles, and for the workstation, it is mounted as /tmp/swapfiles. Hope that helps, Jim McQuillan [EMAIL PROTECTED] On Thu, 22 Aug 2002, Tom Allison wrote: > I have an interestingly backwards problem here. > > I am trying to configure a P-233 with a local linux install and ltsp > with ltsp the default. It's a "hack" box for messing around with. > > But the video settings under ltsp are much better than what I'm able > to acheive under 'Xfree86 -configure'. Is there some way that I can > view what the LTSP XF86Configure file settings are for the client > workstation under LTSP? > > It would sure save me a lot of messing around with XFree. > > -- ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
