Try dropping the ".o" the new stuff uses modprobe rather than insmod to import modules
Jason On Mon, 2001-10-08 at 02:51, Brian Crowley wrote: > Jim, > > It has taken a while but I have tried the newer kernel and it works with > the rtl8139. Auto detect of the network card works, so no options 128 or > 129 are required in dhcpd.conf. > > This m/b has an i810 chipset and even though I put in the MODULE_01 = > agpgart.o line it didn't load the module. It looks like the path specified > in the rc.local is wrong. If I manually put the agpgart.o module where the > rc.local is looking (/lib/modules/2.4.9-ltsp/) then it loads ok. For those > using the i810 the other line required in the lts.conf is X4_DRIVER = i810, > just in case you didn't know the module name. > > I've also tried the RC_FILE_01 to load a thing called portserver to give us > access to the serial port. That works well. > > I was also trying to change the mouse resolution without success. From > reading the rc.setupx it looks as though you read the mouse resolution but > it doesn't get written out anywhere. (I could easily be wrong as I'm not a > programmer!) Any thoughts on that? > > Otherwise it all looks good. > > Regards, > Brian. > > At 01:26 PM 26/9/01 , you wrote: > >Brian, > > > >Yes, the 8139too is the correct driver, but the 2.4.5 linux kernel has a > >problem with 8139's. > > > >But, you are in luck. I now have the 2.4.9 kernel with the NFS root > >patch, and it works just > >fine with the 8139 cards. > > > >I'll have it on the download page later tonight. > > > >I hope that helps, > > > >Jim McQuillan > >[EMAIL PROTECTED] > > ======================================================================= > Brian Crowley email : [EMAIL PROTECTED] > Technical Officer phone : +61-2-9476-2244 > Amalgamated Instrument Co Pty Ltd fax : +61-2-9476-2902 > 5/28 Leighton Place, Hornsby, web : www.aicpl.com.au > NSW, Australia 2077. > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > -- Jason Straw [EMAIL PROTECTED] [EMAIL PROTECTED] Yorktown High School Linux Users' Group Meetings Coordinator / yhslug.tux.org Upcoming Meetings! October 5th: LTSP _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
