Larry,
Do you have the 'option-128' entry still there ?
It isn't clear from your message, but i'm assuming
that you do, because you are at least getting the
8390.o module loading when you only specify NIC=ne
Are you sure the IO address is 0x300 ? The card can
be set at any one of several addresses. I've got a
workstation on my network using an NE2000 card, and here
is what I have:
option option-128 e4:45:74:68:00:00;
option option-129 "NIC=ne IO=0x340";
So, Double check your settings on the card and in
the dhcpd.conf file. Maybe you'll spot it.
If not, you know where to find us :)
Jim McQuillan
[EMAIL PROTECTED]
Larry Baddock wrote:
> Hi.
>
> I'm having huge hassles getting old isa ne2k ethernet cards to work with
> ltsp3.0, and I've got lots of them in workstations.
>
> Basically, if in dhcp, I set the following:
> option-129 "NIC=ne",
> then on boot the workstation complains (correctly) after loading 8390.o,
> stating that there is no IO=0x???, which is required by the module.
>
> HOWEVER, when I change the dhcp to the following:
> option-129 "NIC=ne IO=0x300",
> on boot the workstation complains again, this time stating that the
> ethernet card could not be automatically probed (This is the same message
> that you get if you don't put the option-129 entry in into dhcp in the
> first place!)
>
> It seems that adding the 'IO=' section to the kernel command line makes
> the original 'NIC=ne' section unrecognisable!
>
> Any help would be greatly appreciated.
>
> TIA
>
> Larry
>
> Larry Baddock, E-mail: [EMAIL PROTECTED]
> Wearcheck Africa
> www.wearcheck.co.za
> A Division of Set Point Technology
> www.setpoint.co.za
>
> This e-mail is intended only for the use of the individual or entity
> named above and may contain information that is confidential and
> privileged. If you are not the intended recipient you are hereby notified
> that any dissemination, distribution or copying of this e-mail is
> strictly prohibited. Opinions, conclusions and other information in the
> message that do not relate to the official business of our firm shall be
> understood as neither given nor endorsed by it.
>
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.openprojects.net
>
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
