Hi, Jim..
> Do you have the 'option-128' entry still there ?
> It isn't clear from your message, but i'm assuming
> that you do, because you are at least getting the
> 8390.o module loading when you only specify NIC=ne
Yes, I do.
> So, Double check your settings on the card and in
> the dhcpd.conf file. Maybe you'll spot it.
Nope. The problem is more basic than this, and with a
bit of thought, I managed to figure it out, based on
the fact that you have some machines working in this
configuration -
To solve the problem, I used a more up to date version
of etherboot! It looks like there is a problem with
older versions of etherboot not sending the command-line
parameters to the kernel correctly.
It all works perfectly now!
If anyone else has problems setting dhcp card parms, this is the
second place to point them, after the dhcp option-128 setting.
Kind Regards
Larry
Larry Baddock, E-mail: [EMAIL PROTECTED]
Wearcheck Africa
www.wearcheck.co.za
A Division of Set Point Technology
www.setpoint.co.za
This e-mail is intended only for the use of the individual or entity
named above and may contain information that is confidential and
privileged. If you are not the intended recipient you are hereby notified
that any dissemination, distribution or copying of this e-mail is
strictly prohibited. Opinions, conclusions and other information in the
message that do not relate to the official business of our firm shall be
understood as neither given nor endorsed by it.
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
