To reply to my own post...... (goes a little red around the ears) OK, I have narrowed it down to suspect S3 cards (and I have lots of them), but now a new problem has cropped up.
The 14" monitor won't show 800x600, but a 17" monitor will. The problem is that it is a school project, and I can't replace all the monitors. What are the various config lines to test various monitor settings in the conf file, because I know that the monitors can do up to 1024x768 in Windows mode. Thanks > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Graeme > Bruton > Sent: Thursday, February 21, 2002 3:00 PM > To: [EMAIL PROTECTED] > Subject: RE: [ltsp-discuss] Config lines in XF86Config.tcsx1 > > > Hi Jim > > I am tearing my hair out at the moment. I was running that XF86_S3 in the > lts.conf, but I am getting fatal server errors. > > The errors i am getting now are "No screens found", and "None of the > configured devices were detected". It also complains about the chipset > being Sigma Designs REALMagic 64/GX, and not S3, but when I change the > lts.conf to XF86_SVGA, it doesn't even show a graphical login screen. > > I am running XFree86-4.0.3-5 with the latest ltsp core and kernels, and I > don't know what to do now. I am stuck. Admittedly, I am fairly new to XF86 > and the config parameters, so my understanding is a bit sparse. > > Please help! > > Thanks > > Graeme > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, February 21, 2002 2:44 PM > > To: Graeme Bruton > > Cc: [EMAIL PROTECTED] > > Subject: Re: [ltsp-discuss] Config lines in XF86Config.tcsx1 > > > > > > Graeme, > > > > Why would you want to put config lines for a S3 in the XF86Config.tcsx1 > > file? > > > > That file is for settings that a TCSX-1 diskless computer would use. > > > > What you probably need to do is put 'XSERVER = XF86_S3' in the > > lts.conf file. That should go in the section specificly for > > the workstation that has an S3 card. > > > > Also, you will need to install the ltsp_x336_s3 package. > > > > I hope that helps, > > > > Jim McQuillan > > [EMAIL PROTECTED] > > > > > > > > On Thu, 21 Feb 2002, Graeme Bruton wrote: > > > > > Hi All > > > > > > Could someone please tell me what lines to put in the > > XF86Config.tcsx1 file > > > for the S3 Trio64V2/DX? I am getting a "No configured > graphics devices" > > > error on the ws. The card has 1024Kb on memory, and is installed in a > > > Pentium MMX 200. > > > > > > Also, what should go in the screen section? > > > > > > TIA > > > > > > Graeme > > > > > > > > > _____________________________________________________________________ > > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > > > > > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net > _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
