Alfredo,
Hmm, it works fine here.
The missing insmod log could be because we now use modprobe
instead of insmod.
Did the 3.0.1 kernel work for you ?
And, I know that it also works fine with VMware.
This is what I have setup for my vmware workstation:
[vmware]
DNS_SERVER = 192.168.254.20
XSERVER = auto
X4_BUSID = "PCI:0:15:0"
X_MODE_0 = 800x600
LOCAL_APPS = N
RUNLEVEL = 5
I hope that helps,
Jim McQuillan
[EMAIL PROTECTED]
On Mon, 11 Mar 2002, Alfredo Munoz wrote:
> Hi,
>
> after updating from 3.0.1 to version 3.0.2, the kernel gets the correct
> IO-parameter for the ISA AMD79C960: rw root=/dev/ram0 init=linuxrc rw NIC=lance
> IO=0x300, but it doesn't seem to be loaded - no "insmod"-log is printed.
> Nevertheless, after successful loading IP and TCP this happend:
> >>
> VFS: Cannot open root device "ram0" or 01:00
> Please append a correct "root=" boot option
> Kernel panic: VFS: Unable to mount root device on 01:00
> <<
> This 486/66-machine boots via nfs/tftp with an image from disk and has 24mb
> of ram.
>
> Using vmware with this new release, newly does not work, too. The
> X_MODE-option is not overtaken to the /tmp/XF86Config file. I've read something about
> special changes to be made when using vmware - some weeks ago. Does anyone can
> tell me which thread this was?
>
> Much thanks,
>
> Alfredo
>
>
--
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
