"Jason A. Pattie" wrote:
>
> Dave Shiels wrote:
>
> >Jason I got the new DHCP loaded butthe rom on the ECS board contains an
> >RPL loader. Any hints? Check my other post!
> >
> Unfortunately, unless you can get a Linux kernel into a DOS image, I
> suppose, you cannot use the RPL bootloader in the ROM. You will need to
> boot from floppy or rip that RPL out of the BOOTROM and replace it with
> Etherboot or PXE. You might check to see if your motherboard has a PXE
> BIOS update.
>
> --
> Jason A. Pattie
> [EMAIL PROTECTED]
>
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.openprojects.net
Could he get PXE into a DOS image? RPL loads PXE, which loads LTSP.
That wouldn't be much different from old Etherboot loading a new
Etherboot, would it?
-David
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
