Vara, How did you copy the eb-5.0.5-3c509.lzdsk file to the floppy ?
You need to dd it. There are instructions on the rom-o-matic site. Jim McQuillan [EMAIL PROTECTED] On Fri, 22 Mar 2002, Vara Jambak wrote: > > dear all, > > I use ltsp3.0. I've set up all the necessasy configuration files needed > based on the documentation provided. > > I used a floppy disk to try it out. I loaded the file > eb-5.0.5-3c509.lzdsk to the disk. On my 486 box. There's only a floppy > drive connected. (I disconnected the cables from the board to the > harddisk) and configure the BIOS accordingly. > > I used a BNC cable and an old 3C509 card. > > I started the server, turned on the workstation but what i got was only a > message saying: > Invalid system disk > Replace the disk, and press any key when ready.. > > I suspected that the cable was the trouble. Since the card is an old 3COM > card, there's no led indicating that it worked properly. BUt the card was > O.K. How can I test the connector of the cable? > > I used a 8-port minihub. And the BNC-led didn't turn on when I started > the workstation. > > Or was it anything else? > > I really need help. > thanks, > > ________________________________________________________________________________ > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional > LTSP help, try #ltsp channel on irc.openprojects.net > -- _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
