At 03:42 AM 04/18/2002 -0700, Novara Sari Jambak wrote:
>
>i used a floppy to boot my workstation. I loaded the
>file from rom-o-matic.net using cat command. But te
>workstation stopped at searching for server (DHCP):
>
>Here is what the e\workstation displayed:
>C000 32K SHADOW ENABLED
>.000021.0000 DONE
>ROM segment 0x0800 length 0x4000 reloc 0x9400
>Etherboot 5.0.4 (GPL) Tagged ELF for [3C5x9]
>Boot from (N)etwork or from (L)ocal? N
>Probing ... [3C5x9]3C5x9 board on ISA at
>0x0280-10Base2
>Ethernet address: 00:20:AF:14:B0:80
>Searchig for server (DHCP) ..
>.....
>
>Does it mean that it needs a DHCP server?
>'Cos in my LAN segment all machines use fixed address.
>I tried to configure the dhcpd.conf for DHCP server
>and then start the dhcpd. But it still displayed the
>same thing.
>
>Please help. I really don't know what to do.
>
>thanks
>Vara
>
If you let the workstation sit for awhile, do you get any additional error
messages?
I have a similar problem booting a Dell GXM 5133 with a 3c509 isa nic
(built-in the mobo). The problem is ISA plug and play. I cannot turn off
plug & play in either the BIOS or using a jumper or switch. I have tried
altering the ltsp configs to announce the isa card, its irq and port
address, but that hasn't worked. My only solution is to disable the 3c509
nic or remove it and install a pci nic if there is a pci slot available.
Tom
[EMAIL PROTECTED]
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
