im building an ltsp with all my nodes having intelpro 10/100 cards. i can boot them easily with floppy on, but i cant run them on pxe mode. (no floppy)... here is my configuration. i actually did it on PXE+LTSP how to. its a great how to. i wonder i cant get my stuff in turn.
client side: INTEL UNDI, PXE-1.0 (B uild Dev) Copyright(C) 1997,1998 INTEL CORPORATION DHCP MAC ADDR: 00 90 27 50 3A CB ...... after a while. PXE-E53: NO BOOT FILENAME RECEIVED DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. server side: i used: tail -f /var/log/messages i got: dhcp: DHCPDISCOVER from 00:90:27:50:3A:CB: via eth0 dhcp: DHCPOFFER on 192.168.1.1 to 00:90:27:50:3A:CB: via eth0 ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
