thakns! any utility ican use for updating it to v2.0. i badly need it to work...
Conrad Lawes wrote: > Jeffrey, you need to update your PXE code to v2.0 or higher. > > ----- Original Message ----- > From: "jeffrey payao" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Saturday, September 07, 2002 7:06 AM > Subject: [Ltsp-discuss] pxe. intel pro 10/100 > > > im building an ltsp with all my nodes having intelpro 10/100 cards. i > > can boot them easily with floppy on, but i cant run them on pxe mode. > > (no floppy)... here is my configuration. i actually did it on PXE+LTSP > > how to. its a great how to. i wonder i cant get my stuff in turn. > > > > client side: > > > > INTEL UNDI, PXE-1.0 (B uild Dev) > > Copyright(C) 1997,1998 INTEL CORPORATION > > DHCP MAC ADDR: 00 90 27 50 3A CB > > ...... > > after a while. > > PXE-E53: NO BOOT FILENAME RECEIVED > > DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. > > > > server side: > > > > i used: tail -f /var/log/messages > > i got: > > > > dhcp: DHCPDISCOVER from 00:90:27:50:3A:CB: via eth0 > > dhcp: DHCPOFFER on 192.168.1.1 to 00:90:27:50:3A:CB: via eth0 > > > > > > > > > > > > ------------------------------------------------------- > > This sf.net email is sponsored by: OSDN - Tired of that same old > > cell phone? Get a new here for FREE! > > https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > ------------------------------------------------------- In remembrance www.osdn.com/911/ _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
