Go to http://www.intel.com/support/network/adapter/pro100/bootagent/tti019.htm
The utility will not work if your PXE code is BIOS-integrated. If it is then you must contact your PC manufacturer for the BIOS flash utility.
jeffrey payao <[EMAIL PROTECTED]>wrote:
thakns! any utility ican use for updating it to v2.0. i badly need it to
work...
Conrad Lawes wrote:
> Jeffrey, you need to update your PXE code to v2.0 or higher.
>
> ----- Original Message -----
> From: "jeffrey payao" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, September 07, 2002 7:06 AM
> Subject: [Ltsp-discuss] pxe. intel pro 10/100
>
> > im building an ltsp with all my nodes having intelpro 10/100 cards. i
> > can boot them easily with floppy on, but i cant run them on pxe mode.
> > (no floppy)... here is my configuration. i actually did it on PXE+LTSP
> > how to. its a great how to. i wonder i cant get my stuff in turn.
> >
> > client side:
> >
> > INTEL UNDI, PXE-1.0 (B uild Dev)
> > Copyright(C) 1997,1998 INTEL CORPORATION
> > DHCP MAC ADDR: 00 90 27 50 3A CB
> > ......
> > after a while.
> > PXE-E53: NO BOOT FILENAME RECEIVED
> > DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER.
> >
> > server side:
> >
> > i used: tail -f /var/log/messages
> > i got:
> >
> > dhcp: DHCPDISCOVER from 00:90:27:50:3A:CB: via eth0
> > dhcp: DHCPOFFER on 192.168.1.1 to 00:90:27:50:3A:CB: via eth0
> >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by: OSDN - Tired of that same old
> > cell phone? Get a new here for FREE!
> > https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
> > _____________________________________________________________________
> > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> > For additional LTSP help, try #ltsp channel on irc.openprojects.net
> >
-------------------------------------------------------
In remembrance
www.osdn.com/911/
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
Conrad Lawes
Yahoo! - We Remember
9-11: A tribute to the more than 3,000 lives lost
