Great, but your root path now changes to the Version 3 location. Your dhcpd.conf
should have a line:
option root-path "/opt/ltsp/i386";
rather than
option root-path "/tftpboot/ltsp/i386";
Check that your /etc/exports also reflects this. BTW, did you run the
/opt/ltsp/i386/templates/ltsp_initialize script? It should have set up your
/etc/exports & /etc/dhcpd.conf correctly.
Regards
Darryl Bond
Ronald Wiplinger wrote:
> Darryl Bond wrote:
>
>> Go back to ltsp.org download page and grab the V3 documentation from
>> the download section. It will guide you through what you need.
>
>
>
> DONE!
> and added the two packages ltsp_x_core and ltsp_x_fonts (the only
> difference so far).
>
> Same status:
> Hangs with the line:
>
> Mounting root file system: /tftpboot/ltsp/i386 from: 192.168.251.254
>
>
> Some improovements though:
> 1. I have removed in /etc/fstab a line from a remote server to mount
> localy on the server. This remote site does not exist at the moment.
> 2. restarting portmapper and nfs results in a new empty line after
> Mounting root ....
> 3. now I also get a log entry (which I cannot solve):
>
> Oct 3 14:50:46 ronald rpc.mountd: authenticated mount request from
> 192.168.251.20:689 for /tftpboot/ltsp/i386 (/tftpboot/ltsp/i386)
> Oct 3 14:50:46 ronald kernel: Installing knfsd (copyright (C) 1996
> [EMAIL PROTECTED]).
> Oct 3 14:50:51 ronald rpc.mountd: authenticated mount request from
> 192.168.251.20:689 for /tftpboot/ltsp/i386 (/tftpboot/ltsp/i386)
> Oct 3 14:51:27 ronald last message repeated 7 times
> Oct 3 14:52:31 ronald last message repeated 13 times
> Oct 3 14:53:32 ronald last message repeated 12 times
>
>
> What is the next suggestion to check / look after ???
>
>
> bye
>
> Ronald
>
>>
>>
>>
>> Ronald Wiplinger wrote:
>>
>>> Darryl Bond wrote:
>>>
>>>> So it is V2
>>>
>>>
>> V2.X is the old version and it used that path. This, among many other
>> things, was changed for V3.
>>
>>
>>
>>>
>>>
>>> Where does it say that?
>>>
>>>
>>>>
>>>> Do the files actually exist in /tftpboot/ltsp?
>>>> Does /etc/exports reflect this?
>>>
>>>
>>>
>>>
>>>
>>> Yes and yes!
>>>
>>>>
>>>> Have you thought about using the LTSP V3 packages. You will find
>>>> them a lot better and easier to maintain eg you will only need one
>>>> kernel for any NIC etc.
>>>
>>>
>>>
>>>
>>> What have I to do?
>>>
>>> bye
>>>
>>> Ronald
>>>
>>>>
>>>>
>>>> Regards
>>>> Darryl
>>>>
>>>>
>>>> Ronald Wiplinger wrote:
>>>>
>>>>> Darryl Bond wrote:
>>>>>
>>>>>> What version of LTSP are you running. This is the root path for
>>>>>> LTSPV2.X
>>>>>> If you are running ltsp V3 then the root path should be
>>>>>> /opt/ltsp/i386
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Do you mean it does not honor the CONIFG file:
>>>>> #=====================================
>>>>> # Global settings...
>>>>> #=====================================
>>>>> #
>>>>> #-------------------------------------
>>>>> # LTSP files and directories
>>>>> #-------------------------------------
>>>>> #
>>>>>
>>>>> LTSP_DIR=/tftpboot/ltsp
>>>>>
>>>>> TFTP_DIR=/tftpboot
>>>>>
>>>>> TMPL_DIR=${LTSP_DIR}/templates
>>>>> LOGFILE=/tftpboot/ltsp-tmp/ltsp.install.log
>>>>> LIBFILE=/tftpboot/ltsp/ltsp.libs
>>>>> SWAP_DIR=/tftpboot/ltsp/swapfiles
>>>>> ROOT_DIR=${LTSP_DIR}/i386 <===
>>>>> /tftpboot/ltsp/i386 #
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> -------------------------------------------------------
>>>> This sf.net email is sponsored by: DEDICATED SERVERS only $89!
>>>> Linux or FreeBSD, FREE setup, FAST network. Get your own server
>>>> today at http://www.ServePath.com/indexfm.htm
>>>> _____________________________________________________________________
>>>> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
>>>> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
>>>> For additional LTSP help, try #ltsp channel on irc.openprojects.net
>>>>
>>>
>>>
>>
>>
>>
>>
>> -------------------------------------------------------
>> This sf.net email is sponsored by:ThinkGeek
>> Welcome to geek heaven.
>> http://thinkgeek.com/sf
>> _____________________________________________________________________
>> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
>> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
>> For additional LTSP help, try #ltsp channel on irc.openprojects.net
>>
>
>
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
