I am trying out LTSP on my home network. I have gone through the install
instructions from various sites and read all the troubleshooting information I
can find. Obviously, I am doing something wrong. I have not been able to get it
to work and I cannot find the error of my ways! Any help, ridicule, etc is
welcome at this point!

I did a clean installation of Mandrake 9.0 and then installed NFS Utilities and
TFTP.

Next I downloaded and installed the ltsp core 3.0.7, ltsp kernel 3.0.5, ltsp X
core 3.0.4, ltsp x fonts 3.0.0, and ran ltsp initialization. I configured
dhcpd.conf and tftp, made a boot disk for my other linux box and booted the
workstation to the disk.

The workstation gets it's address from dhcpd and then goes to load the kernel
from the server 192.168.0.254 from /lts/vmlinuz-2.4.19-ltsp-1. The following
appears at the end of the loading statement and this is as far as it goes:
"...(NBI)... ......."


I have included var/log/messages, dhcpd.conf, and lts.conf below. 


Thanks!

Rick Gatewood



var/log/messages
Jan  8 09:01:10 ltsp dhcpd: DHCPDISCOVER from 00:50:ba:43:3a:6b via eth0
Jan  8 09:01:10 ltsp dhcpd: DHCPOFFER on 192.168.0.253 to 00:50:ba:43:3a:6b via 
eth0
Jan  8 09:01:10 ltsp dhcpd: DHCPREQUEST for 192.168.0.253 (192.168.0.254) from
00:50:ba:43:3a:6b via eth0
Jan  8 09:01:10 ltsp dhcpd: DHCPACK on 192.168.0.253 to 00:50:ba:43:3a:6b via 
eth0

dhcpd.conf
ddns-update-style             none;
default-lease-time            21600;
max-lease-time                21600;

option subnet-mask            255.255.255.0;
option broadcast-address      192.168.0.255;
option routers                192.168.0.254;
option domain-name-servers    192.168.0.254;
option domain-name            "gatewoods.org";
option root-path              "192.168.0.254:/opt/ltsp/i386";

option option-128 code 128 = string;
option option-129 code 129 = text;

shared-network WORKSTATIONS {
    subnet 192.168.0.0 netmask 255.255.255.0 {
    }
}


group   {
    use-host-decl-names       on;
    option log-servers        192.168.0.254;

    host ws253 {
        hardware ethernet     00:50:BA:43:3A:6B;
        fixed-address         192.168.0.253;
        filename              "/lts/vmlinuz-2.4.19-ltsp-1";

    }
}


lts.conf

#
# Config file for the Linux Terminal Server Project (www.ltsp.org)
#

[Default]
        SERVER             = 192.168.0.254
        XSERVER            = auto
        X_MOUSE_PROTOCOL   = "PS/2"
        X_MOUSE_DEVICE     = "/dev/psaux"
        X_MOUSE_RESOLUTION = 400
        X_MOUSE_BUTTONS    = 3
        USE_XFS            = Y
        LOCAL_APPS         = N
        RUNLEVEL           = 5

#------------------------------------------------------------------------------
#
# Example of specifying X settings for a workstation
#
[ws253]
        XSERVER            = auto
        LOCAL_APPS         = N
        USE_NFS_SWAP       = N
        SWAPFILE_SIZE      = 48m
        RUNLEVEL           = 5



-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_____________________________________________________________________
Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
      https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help,   try #ltsp channel on irc.openprojects.net

Reply via email to