Hello Anselm
----- Original Message -----
From: "Anselm Martin Hoffmeister" <[EMAIL PROTECTED]>
To: "Gerhard Damerau" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Sunday, February 02, 2003 5:05 PM
Subject: Re[2]: [Ltsp-discuss] permanent reboots
> >> Problem could be that the RAM size is not detected correctly. Try
> >> passing an appropriate kernel parameter (option-129 with
> >> mem=32768k)...
>
> GD> Before I try tomorrow...:
> GD> Am I right, you propose to set this line into dhcpd.conf, so it would
be
>
> GD> # that's the machine!
> GD> host essen9{
> GD> hardware ethernet 00:80:c8:94:40:45;
> GD> fixed-address 172.16.99.9;
> GD> filename "/lts/vmlinuz";
> GD> option-129 mem=32768k;
> GD> }
>
> GD> Would that be correct?
> GD> I wonder if my dhcpd understands an option-129.
> GD> My dhcpd seems to be ISC dhcpd Version 2 and the manpage doesn't tell
anything
> GD> about this feature.
>
> In version 3, you would have to declare that option. AFAIK, DHCPd 2
> just knows what to do. In your place, I preferred to put "" around
> mem=32768k, but the rest seems fine.
>
> Good luck.
Thank you.
I tried via putty and dhcpd now starts without error.
The dhcpd.conf ist now:
host essen9 {
hardware ethernet 00:80:c8:94:40:45;
fixed-address 172.16.99.9;
filename "/lts/vmlinuz";
option option-129 "mem=32768k";
}
I will see tomorrow if I can start the machine and I will report to you.
Thanks for the advice!
And thanks to the developer(s) for this fine system!
Gerhard Damerau
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
