oops my mistake, I guell Ill have to pay more
attention 8)
--- Randal Cobb <[EMAIL PROTECTED]> wrote:
> Respectfully, it IS loading the proper kernel. It's
> after the kernel
> loads and boots that I have the problem... it's
> where the root
> filesystem is being mounted over NFS where it seems
> to die.
>
> On Mon, 2003-02-10 at 13:06, pedro noticioso wrote:
>
> > check the example dhcpd.conf from the docs, for
> > starters your ws is not supposedd to load
> > /opt/ltsp/i386, it has to load the file in
> > /tftpboot/lts/vmlinuxkernel... because THAT is the
> > kernel for the ws 8)
> >
> >
> > --- Randal Cobb <[EMAIL PROTECTED]> wrote:
> > > Good morning all,
> > >
> > > I am new to LTSP, but I have indeed searched the
> > > archives with no luck
> > > finding my answer before asking this...
> > >
> > > I am trying to get a floppy only pentium MMX
> > > terminal working with
> > > LTSP. It contains a 3C509, in which PNP has
> been
> > > disabled. My problem
> > > seems to be when the initrd process tries to
> mount
> > > the NFS root... I
> > > get a message as follows:
> > >
> > > Mounting root filesystem: /opt/ltsp/i386 from:
> > > 172.27.6.25
> > >
> > > And it just sits at this location indefinately;
> it's
> > > not locked up, I
> > > can see network traffic originating from it with
> > > Ethereal. I have
> > > reviewed the /var/log/messages file and can see
> DHCP
> > > requests being
> > > processed every 4 hours (I left it running over
> the
> > > weekend), but no NFS
> > > messages at all. I know that NFS is configured
> > > properly, because if I
> > > spoof the appropriate IP address on my laptop
> > > (running a full linux
> > > install), I can successfully NFS mount both the
> swap
> > > and root locations
> > > (and I get the subsequent NFS messages in the
> log
> > > file.)
> > >
> > > I have had to move the DHCP broadcast/listen
> address
> > > to ports 1001 and
> > > 1002 respectively due to another OS's DHCP
> server on
> > > the same subnet.
> > > This seems to work properly, as the terminal
> does
> > > boot, loads the
> > > kernel, and initializes the kernel driver
> > > successfully, and I do get the
> > > 'eth0: Setting Rx mode to 1 addresses.' message
> > > before trying to NFS
> > > mount the root.
> > >
> > > Anyone have any ideas where I should look?
> > >
> > > I don't know if it is important, but after
> running
> > > the ltsp_initialize
> > > script, I noticed several symlinks in the
> > > 'soon-to-be-NFS-mounted root'
> > > that point to files in the /tmp directory that
> were
> > > not there (e.g.,
> > > broken symlinks). Do these need to be fixed and
> > > point to real files?
> > > Simply 'touch'ing them seems to make no
> difference.
> > >
> > > I've included my ltsa.conf (totally default) and
> > > dhcpd.conf files below
> > > if they may lead to any clues.
> > >
> > > DHCPD.CONF ==
> > > default-lease-time 21600;
> > > max-lease-time 21600;
> > >
> > > option subnet-mask 255.255.254.0;
> > > option broadcast-address 172.27.6.255;
> > > option routers 172.27.6.25;
> > > option domain-name-servers 172.27.6.25;
> > > option domain-name "setdr.org";
> > > option root-path
> > > "172.27.6.25:/opt/ltsp/i386";
> > >
> > > shared-network WORKSTATIONS {
> > > subnet 172.27.6.0 netmask 255.255.254.0 {
> > > }
> > > }
> > >
> > > group {
> > > use-host-decl-names on;
> > > option log-servers 172.27.6.25;
> > >
> > > host ws001 {
> > > hardware ethernet 00:A0:24:08:AC:3F;
> > > fixed-address 172.27.6.54;
> > > filename
> > > "/lts/vmlinuz-2.4.20-ltsp-1";
> > > option option-128 e4:45:74:68:00:00;
>
> > > #This is NOT a MAC
> > > address
> > > option option-129 "NIC=3c509";
> > > }
> > > }
> > >
> > > LTS.CONF==
> > > [Default]
> > > SERVER = 172.27.6.25
> > > XSERVER = auto
> > > X_MOUSE_PROTOCOL = "PS/2"
> > > X_MOUSE_DEVICE = "/dev/psaux"
> > > X_MOUSE_RESOLUTION = 400
> > > X_MOUSE_BUTTONS = 3
> > > USE_XFS = N
> > > LOCAL_APPS = N
> > > RUNLEVEL = 5
> > >
> > >
> >
>
#------------------------------------------------------------------------------
> > > #
> > > # Example of specifying X settings for a
> workstation
> > > #
> > > [ws001]
> > > XSERVER = auto
> > > LOCAL_APPS = N
> > > USE_NFS_SWAP = N
> > > SWAPFILE_SIZE = 48m
> > > RUNLEVEL = 5
> > >
> > > [ws002]
> > > XSERVER = XF86_SVGA
> > > LOCAL_APPS = N
> > > USE_NFS_SWAP = N
> > > SWAPFILE_SIZE = 64m
> > > RUNLEVEL = 3
> > >
> > > #
> > > # ws004 is my virtual workstation running in a
> > > VMware session
> > > #
> > > [ws004]
> > > DNS_SERVER = 192.168.0.254
> > > XSERVER = auto
> > > X4_BUSID = "PCI:0:15:0"
> > > X_MODE_0 = 800x600
> > > LOCAL_APPS = N
> > > USE_NFS_SWAP = N
> > > SWAPFILE_SIZE = 64m
> > > RUNLEVEL = 5
> > >
> > >
> >
>
#------------------------------------------------------------------------------
> > > #
> > > # Example of a workstation configured to load
> some
> > > modules
> > > #
> > > #[ws001]
> > > # MODULE_01 = agpgart.o
> #
> > > This is for i810 video
> > > # MODULE_02 = uart401.o
> > > # MODULE_03 = sb.o io=0x220 irq=5 dma=1
> > > # MODULE_04 = opl3.o
> > >
> > >
> >
>
#------------------------------------------------------------------------------
> > > #
> > > # Example of ws001 configured for local apps
> > > #
> > > #[ws001]
> > > # LOCAL_APPS = Y
> > > # LOCAL_WM = Y
> > > # NIS_DOMAIN = ltsp
> > > # NIS_SERVER = 192.168.0.254
> > >
>
=== message truncated ===
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
