Am Dienstag, 4. M�rz 2003 16:30 schrieb Robert W March: > With ltsp-3.0.1 and RH7.2, the Deskpro terminals were performing well at > 1024x768x16bpp. Upgraded OS to RH7.3 and upgraded ltsp core and xcore to > 3.04. > > The non-Deskpro terminals continue to operate normally. However, after > the upgrade, the Deskpro terminals failed to start X (black screen and > the display's front panel lights flashing). My problem is that switching > to VT1 on the terminal to see the error message -- no error is given. > All of the XFree86 monologue looks perfectly normal and correct. In > particular, 4096 bytes of video detected. > > Tried specifying 4096 for video, nil fix. > > So I specified 800x600 in lts.conf. This fixed it. But I want the > higher display resolution that I had before the upgrade. > > Can someone say what is going on here?
x-core 3.0.4 is an xfree cvs release. If you don't need it for other terminals (it supports more graphics cards than 3.0.1), downgrade the x-core package to 3.0.1 and your problems will probably go away. Georg ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
