Hello Georg,
Thanks for your help. I replaced x-core 3.0.4 with x-core 3.0.1-1. This did
not fix the problem of X not starting. Eventually I discovered that the rpm
-Uvh operation seemed to have overwrote lts.conf (and without making a
backup). In so doing monitor parameters were lost.
Thanks again.
-Robert
On March 4, 2003 16:36, Georg Baum wrote:
> x-core 3.0.4 is an xfree cvs release. If you don't need it for other
> terminals (it supports more graphics cards than 3.0.1), downgrade the
> x-core package to 3.0.1 and your problems will probably go away.
>
> Georg
--
Robert March
St Andrew's House
L'Orignal ON K0B 1K0
-------------------------------------------------------
This SF.net email is sponsored by:Crypto Challenge is now open!
Get cracking and register here for some mind boggling fun and
the chance of winning an Apple iPod:
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0031en
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
