Hi All,
I am running LTSP v3 on RH8. One of my terminals is a Packard Bell P133
with the built in Cirrus chip set. It is using a 3Com 3C590 NIC. It
boots fine but when I get to the X session it appears as 2 images on the
monitor, one overlapped over the other but one image is to the left of
the other. Also the display is 640x480 instead of the 1024x768 it is set
to. I checked the lts.conf file and the xserver is set to auto.
The video chip set is built into the motherboard. I have tried 3
different boards but it appears that it only finds the onboard cirrus
chip. Is there a way to tell it to probe the system for other video
boards. I did not see a way to disable the onboard video chipset in the
BIOS.
Any ideas on why this happens?
Thanks
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger
for complex code. Debugging C/C++ programs can leave you feeling lost and
disoriented. TotalView can help you find your way. Available on major UNIX
and Linux platforms. Try it free. www.etnus.com
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
