try the "vesa", "fbdev" or the "vga" drivers and set the modelines, for generic values use 60 Mhz with this automatic calculator
http://www.hut.fi/Misc/Electronics/faq/vga2rgb/calc.html --- Norine <[EMAIL PROTECTED]> wrote: > Hi All, > I am running LTSP v3 on RH8. One of my terminals is > a Packard Bell P133 > with the built in Cirrus chip set. It is using a > 3Com 3C590 NIC. It > boots fine but when I get to the X session it > appears as 2 images on the > monitor, one overlapped over the other but one image > is to the left of > the other. Also the display is 640x480 instead of > the 1024x768 it is set > to. I checked the lts.conf file and the xserver is > set to auto. > > The video chip set is built into the motherboard. I > have tried 3 > different boards but it appears that it only finds > the onboard cirrus > chip. Is there a way to tell it to probe the system > for other video > boards. I did not see a way to disable the onboard > video chipset in the > BIOS. > > Any ideas on why this happens? > > Thanks > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Etnus, makers of > TotalView, The debugger > for complex code. Debugging C/C++ programs can leave > you feeling lost and > disoriented. TotalView can help you find your way. > Available on major UNIX > and Linux platforms. Try it free. www.etnus.com > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or > change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.freenode.net __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/ ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The debugger for complex code. Debugging C/C++ programs can leave you feeling lost and disoriented. TotalView can help you find your way. Available on major UNIX and Linux platforms. Try it free. www.etnus.com _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
