On Mon, 10 Mar 2003, Bryan Cruickshank wrote: > > > Ok, I seem to be getting somewhere!!! Thanks so much for the help so > far, based on your last message I decided to copy the boot.b file from > my testdrive system not the one from the ltsp image. No version conflict > and lilo ran fine. Now the unit boots but I'm having network connect > problems. The usb port senses the nic and loads the drivers, but the > usb nic doesn't detect a link. I'm going to try another adapter just to > make sure this one isn't the problem. Thanks again to you and the others > that have been so helpful
Bryan, Good to see that you are making progress! What brand of adapter are you using? The I-opener is pretty finicky in this regard. The only adapter that I could get to work correctly was the Linksys USB100TX. It has the pegasus chipset. Probably the best place to get information on currently available usb network adapters that work with linux and the I-opener is at the I-opener discussion list. If you haven't checked it out already the url is <http://www.linux-hacker.net/cgi-bin/UltraBoard/UltraBoard.pl>. Good luck! Jesse McDonnell ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
