> Алло Астахов,
>
> (hej, I finally found a usage for my cyrillic keyboard! :-)
>
> > I want use an i386 computer as client.
> > This computer equiped only ISA slots.
> > I use D-Link DE-220T NIC. This card not plug and play.
>
> > This computer load kernel image from network.
> > But kernel can't detect this NIC.
>
> In your dhcpd.conf (on the server), you must specify
>
> option option-129 "NIC=ne IO=0x300";
> and exchange 0x300 for the *real* ioport of your nic.
> Probably you need a statement like
>
> option option-129 code 129 = string;
> too.
Done.
>
> This is used by the LTSP initial ramdisk to load the driver module for
> the NIC, because autodetection on ISA would be a bad idea ;-)
>
> Best regards,
At boot time I can read:
NE*000 ethercard probe at 0x300 ......
eth0: NE2000 Found using IRQ 5.
But trouble not solve.
Should I use module for this driver?
Is in kernel config Network device support -> Ethernet 10/100 -> Other ISA
cards -> NE2000/NE1000 right driver?
WBR, Zebar
-------------------------------------------------------
This SF.Net email sponsored by: Parasoft
Error proof Web apps, automate testing & more.
Download & eval WebKing and get a free book.
www.parasoft.com/bulletproofapps
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.freenode.net
