ok but in the floppy disk driver exist a flash software ,may be can write the eprom 27c128 or 27c256
the card have the slot for the chip thanks for the help --------------------------------------------- >In other hand I just by too a via6105 chip based network card >and it have a 93LC46 chip (memory) mounted under the >rom slot. > >May be I can use this chip us a rom ? >Can I flash these memory with the boot program ? No, that is a serial EEPROM, only big enough to hold the MAC address of the NIC and a few other parameters. And it's not connected in a way that it can be used for booting anyway. ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net . ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0 _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
