On 9/28/05, Roberto Leiva M. (Lista) <[EMAIL PROTECTED]> wrote: > if possible to increase perfomance for thin client connected by DSL (256 to > 512 KB/s). > Server: > CenOs 4.1 + ltsp 4.1 + kde 3.3.1 > my clients load kernel with pxe-boot(bios) [ filename > "/lts/2.6.9-ltsp-3/pxelinux.0"; ] > the time in load is around 5 minute and app run slow. these clients doesn't > have diskette, cd-rom > and ..... is not possible load kernel by boot-image. > note: i don't have problem with thin client connected by Lan (100 MB/s) > any tips for decrease latency
Is my understanding correct that you are booting off a client connected to your server through DSL line? Very interesting. Can you share your configuration? OTOH if I consider that on a 100mbps (not 100 MB/s as you wrote) it takes about 30 seconds for PXE boot and assuming that during this while the max band width is about 20mbps it makes sense that you are able to boot in 5 minutes. Only thng is you can try to make a cdrom with do boot and appropriate image from rom-o-matic.net. -- Sudev Barar Learning Linux ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
