Hi Sudev, Thanks for your reply.
Sudev Barar wrote: >> I used 1 network 192.168.0.x/24 .. can I implement this 2 LTSP ? >> what about the DHCP Server ? > [SNIP] >> I need your suggestion about server hardware minimum requirement. >> I would like to use LTSP for about 20 clients. >> >> What is the minimum requirement for the server? >> If I would like to use 2 LTSP Servers, how to setup it? > > Very briefly I would describe solution as : > > For 20 clients one server is sufficient with rough specs like : dual > core processor / 64bit processor and 4gb RAM SCSI drive x2 > > If you want to run two servers I would suggest that you run them as > master salve server so that if one goes down the other keeps the > services running. LTSP wiki describes how to run DHCP server in master > slave setup. Thanks for this usefull link for me ... > Also the "home" directories should be kept in server1 and backed up / > mirrored on server2. In normal situation server2 should mount home > over NFS and the mirror is only used when NFS mount fails due to > server1 going down. I planed not to use master-slave server because each user only have access to 1(one) server ... server1 or srever2 ... Let me try the wiki ways :) and i'll be back if i have problem :) Best Regards, Donny Christiaan. [EMAIL PROTECTED] ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
